Yes it will. The Correct Track Trailer Alignment and Lift Kit item # RR55QX is compatible with the Equa-Flex System. It will give you a lift of either 1-1/4" or 2-1/4". view full answer...
If you have round axles with either 2-3/8" or 3" diameter, and your current suspension system is installed below the axle then you can use either the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 for 2-3/8" diameter axle. Or use the # K71-385-00 kit for a 3" diameter axle.
From the info you provided I can not determine the size axle you have. However, you can easily measure to determine size. Using a digital caliper similar to Item # PTW80157 is ideal, but a simple tape... view full answer...
I would be happy to go over an option for you, but based on the axle tag you provided your axle is pretty short at only 77.5" hub face to hub face so we do not have a 5200lb standard axle that would work as our shortest 5200lb axle is 86-1/2" long.
One option is to have an axle custom built to exactly match your current axle, you would need to go to a local axle shop for this.
The option I recommend is going with the Timbren Axle-Less Suspension System which will bolt directly to the... view full answer...
The Camco RV Single-Stage Heat and Cool Wall Thermostat # CAM09221 could potentially work, but for an exact replacement you need the Dometic Replacement Single Zone Thermostat # DMC79FR. This allows you to retain the same digital screen and functions that you're currently using.. view full answer...
The Stromberg jack part # JET-2500 is a solid choice that will get the job done. It's not the fastest jack on the market but it will save your Dad's shoulder. If you wanted something that works really quickly though the Phoenix part # UF38-944040 basically can fully extend and retract with weight on it in 9.5 seconds. The Stromberg might take a minute or two. view full answer...
You will need to measure the diameter of your 2016 Pacific Coachworks Northland Travel Trailer's axle to determine which kit you would need.
2-3/8" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit item # K71-384-00
- 3" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit item # K71-385-00 view full answer...
The most common bolt pattern for a 15" trailer wheel is 6 on 5-1/2" so this is very likely what you have now. In order to choose the correct spare you just need to know your tire size. The Westlake ST225/75R15 Radial Trailer Tire w/ 15" Silver Mod Wheel part # LHAW124 for example uses a 225/75-15 tire (load range e) with 6 on 5-1/2" wheel.
I have attached a full list of all our wheels/tires in the wheel size you mentioned as well. view full answer...
We do have the ceiling garnish you are looking for that fits your MaxxFan Deluxe Roof Vent # MA00-06200K.
What you need is the part you mentioned, the Ceiling Garnish for MaxxAir Maxxfan RV Roof Vent - White # MA54FR.
We assign our own part numbers, but this is the exact 10-20211 garnish you were asking about. view full answer...
Thanks for the photo. The Swagman Around the Spare Deluxe 2 Bike Rack for RV Bumpers # S80501 and the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 are great options for your 2016 Pacific Coachworks Northland Travel Trailer. The bumper has to be completely enclosed is the explanation you are likely seeking. The Tube with fully welded enclosed ends is ideal and is normal for many applications but not all. You can alternatively use the Curt RV Bumper 2" Trailer... view full answer...
It sounds like you're talking about the Lippert RV Door Shim Installation and Alignment Kit # LC84HD. This is listed as part 709983 on the Lippert site if you're looking to cross-reference and make sure this is what you're needing. view full answer...
I spoke with the manufacturer and their tech confirmed that the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 99-1/8" Wide Item # 3441409912PBK actually come 1/8" smaller than what it's listed as so it will fit your 99" opening. view full answer...
Go To Results